Products

Filter Results




Product Types

Product Applications

Markets

Clear All

Selected Filters:


  • SP-1264

    Features:

    • 100% Solids
    • Excellent wetting properties
    • Superior penetration and adhesion properties creating a stronger bond between the topcoat and the concrete substrate
    • Resistance to stress cracking
    • User friendly
    • Easily applied by brush, roller and spray

    Description:

    A two-component, 100% solids epoxy sealer designed for use on damp concrete. This product has excellent adhesion to cold and damp concrete. This product has exceptional sealing capability that easily penetrates pores and tiny cracks in concrete and masonry surfaces.


  • SP-1288 GP Brush

    Features:

    • Excellent resistance to cathodic disbonding up to 65°C (149°F) with SSPC SP-11 Surface Preparation.
    • Excellent adhesion to SSPC SP-11 prepared steel surfaces, Fusion Bond Epoxy (FBE), and Fiber Reinforced Plastic (FRP).
    • 100% solids
    • Excellent impact resistance
    • Good Flexibility
    • High build single coat application up to 40 mil
    • Easily applied by spray, brush or roller

    Description:

    A two-component ambient cured epoxy based on novel leading edge technology. This product can be used in applications where abrasive blasting is not possible or feasible. It exhibits excellent adhesion on metal substrates prepared as per SSPC SP-11 Surface Preparation Standard.


  • SP-1288 GP Spray

    Features:

    • Excellent resistance to cathodic disbonding up to 65°C (149°F) with SSPC SP-11 Surface Preparation.
    • Excellent adhesion to SSPC SP-11 prepared steel surfaces, Fusion Bond Epoxy (FBE), and Fiber Reinforced Plastic (FRP).
    • 100% solids
    • Excellent impact resistance
    • Good Flexibility
    • High build single coat application up to 40 mil
    • Easily applied by spray, brush or roller

    Description:

    A two-component ambient cured epoxy based on novel leading edge technology. This product can be used in applications where abrasive blasting is not possible or feasible. It exhibits excellent adhesion on metal substrates prepared as per SSPC SP-11 Surface Preparation Standard.


  • SP-1386 Brush

    Features:

    • Excellent adhesion to steel surfaces, Fusion Bond Epoxy (FBE)
    • 100% solids
    • Excellent fresh water and salt water resistance
    • Good flexibility with >50% elongation
    • Good acid and abrasion resistance
    • High build one-coat application
    • Certified by UL to meet NSF/ANSI/CAN 61 and NSF/ANSI/CAN 600

    Description:

    A hybrid two-component, elastomeric polyurethane coating designed for long-term corrosion protection of steel and concrete substrates. Available in Spray Grade and Brush Grade. This product meets the AWWA C222 requirements.


  • SP-1386 Spray

    Features:

    • Excellent adhesion to steel surfaces, Fusion Bond Epoxy (FBE)
    • 100% solids
    • Excellent fresh water and salt water resistance
    • Good flexibility with >50% elongation
    • Good acid and abrasion resistance
    • High build one-coat application
    • Certified by UL to meet NSF/ANSI/CAN 61 and NSF/ANSI/CAN 600

    Description:

    A hybrid two-component, elastomeric polyurethane coating designed for long-term corrosion protection of steel and concrete substrates. Available in Spray Grade and Brush Grade. This product meets the AWWA C222 requirements.


  • SP-1864

    Features:

    • Excellent resistance to high temperature cathodic disbonding up to 65˚C (149˚F)
    • Excellent adhesion to steel surfaces, Fusion Bond Epoxy (FBE), Fiber Reinforced Plastic (FRP) and concrete
    • High build one-coat application
    • 100% solids – Does not contain coal tar
    • Excellent fresh and salt water, impact and abrasion resistance

    Description:

    A “coal tar free”, high performance two-component polyurethane coating engineered for applications in Marine, Industrial and Pipeline industries. This low friction, high abrasion and impact resistant coating is used on exterior hulls to reduce ad-freezing of ships provide abrasion and corrosion protection. Further, it is used to coat marine pilings and docks where impact and abrasion resistance is required and cathodic protection is utilized. Available in Spray Grade and Brush Grade.


  • SP-1890 Brush

    Features:

    • Provides outstanding adhesion to properly prepared Polyolefin (PE) surfaces and liquid epoxy field joint coatings.
    • 100% Solids

    Description:

    A two-component 100% solids modified epoxy polymer designed to provide superior adhesion between three-layer (“3L”) Polyolefin (“PE”) and liquid epoxy joint coatings.


  • SP-2810

    Features:

    • 100% Solids
    • High build single coat application
    • May be applied down to -18°C (0°F)
    • Isocyanate free
    • Excellent cathodic disbonding performance at temperatures up to 65°C (149°F)
    • Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE) or Fiber Reinforced Plastic (FRP)

    Description:

    A two-component modified epoxy coating designed for use in winter application on cold substrates. This product has the ability to cure down to -10°C (14°F). It is used for applications in cold weather (winter) where other coating systems would require preheating of the substrate or enclosure and application of external heat for curing purposes. It is ideal for utilization on facilities operating at low temperatures, which precludes the use of preheating / external heat.


  • SP-2831 Brush

    Features:

    • 100% solids
    • Excellent cathodic disbonding performance at temperatures up to 65˚C (149˚F)
    • Single coat application
    • Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE) or Fiber Reinforced Plastic (FRP)
    • Isocyanate free

    Description:

    A solvent free, 100% solids, two-component epoxy coating that has the ability to cure down to 0˚C (32˚F). Used for application in cool weather (fall/winter) where other coating systems would require preheating of the substrate or enclosure and application of external heat for curing purpose. It is ideal for utilization on facilities operating at low temperatures, which precludes the use of preheating/ external heat. Available in both Spray Grade and Brush Grade.


  • SP-2831 Spray

    Features:

    • 100% solids
    • Excellent cathodic disbonding performance at temperatures up to 65˚C (149˚F)
    • Single coat application
    • Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE) or Fiber Reinforced Plastic (FRP)
    • Isocyanate free

    Description:

    A solvent free, 100% solids, two-component epoxy coating that has the ability to cure down to 0˚C (32˚F). Used for application in cool weather (fall/winter) where other coating systems would require preheating of the substrate or enclosure and application of external heat for curing purpose. It is ideal for utilization on facilities operating at low temperatures, which precludes the use of preheating/ external heat. Available in both Spray Grade and Brush Grade.


  • SP-2832

    Features:

    • Excellent resistance to cathodic disbondment up to 65˚C (149˚F)
    • Excellent adhesion to grit blasted steel surfaces, fusion bond epoxy, liquid epoxy, and urethane coatings
    • 100% Solids
    • High build one-coat application
    • Standard high-pressure airless application

    Description:

    A 100% solids technologically advanced epoxy coating designed for general purpose corrosion protection in the Oil and Gas Industry. This product can be applied through standard high-pressure airless spray equipment. It has superior anti-corrosive properties on the exterior of steel pipelines for above and below ground service.


  • SP-2881

    Features:

    • Outstanding protection of buried pipes and tanks to mechanical and abrasion damage
    • Excellent corrosion protection for structures in marine and chemical environments
    • Excellent corrosion resistance to sea and fresh water immersion
    • Excellent resistance to cathodic disbondment
    • Excellent resistance to electric insulation (12000 volts/mm)

    Description:

    An ultra high solids, self-priming epoxy coating with excellent corrosion resistance to marine and petrochemical environments. SP-2881 is used primarily for the corrosion protection of buried pipes and tanks.


  • SP-2882

    Features:

    • Outstanding protection of buried pipes and tanks to mechanical and abrasion damage
    • Excellent corrosion resistance to marine and chemical environments
    • Excellent corrosion resistance to buried pipes and tanks
    • Excellent resistance to mechanical and abrasion damage
    • Excellent resistance to cathodic disbondment
    • Excellent resistance to electric insulation (12000 volts/mm)

    Description:

    An ultra high solids, self-priming epoxy coating with excellent corrosion resistance to marine and petrochemical environments. SP-2882 is used primarily for the corrosion protection of buried pipes and tanks.


  • SP-2884

    Features:

    • Outstanding protection of buried pipes and tanks to mechanical and abrasion damage
    • Excellent corrosion resistance to marine and chemical environments
    • Excellent corrosion resistance to buried pipes and tanks
    • Excellent resistance to mechanical and abrasion damage
    • Excellent resistance to cathodic disbondment
    • Excellent resistance to electric insulation (12000 volts/mm)

    Description:

    An ultra high solids, self-priming epoxy coating with excellent corrosion resistance to marine and petrochemical environments. SP-2884 is used primarily for the corrosion protection of buried pipes and tanks. It is designed for brush and roll use only.


  • SP-2888 RG Brush

    Features:

    • Excellent resistance to cathodic disbonding up to 85˚C (185˚F)
    • Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE), Fiber Reinforced Plastic (FRP) and Polyolefin (PP/PE)
    • Excellent abrasion, chemical, water absorption and impact resistance
    • Good flexibility
    • High build single coat application >50 mils
    • 100% solids, Isocyanate free, environmentally friendly & safe
    • Easily applied by spray, brush, roller or cartridge

    Description:

    SP-2888® RG is an epoxy/polyurethane Hybrid coating based on “State of the Art” epoxy/urethane chemistry. The synergistic effect of co-polymerizing epoxy and polyurethane produces a coating with the superior adhesion and corrosion resistance of an epoxy along with the added toughness of a polyurethane. This environmentally friendly, 100% solids, & isocyanate free, two component coating system is available in Brush Grade, Spray Grade, Repair Cartridges and Spray Cartridges. SP-2888® RG is the coating most preferred for protection of steel and other metal surfaces from severe corrosion and abrasion.


  • SP-2888 RG Cartridge

    Features:

    • Excellent resistance to cathodic disbonding up to 85˚C (185˚F)
    • Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE), Fiber Reinforced Plastic (FRP) and Polyolefin (PP/PE)
    • Excellent abrasion, chemical, water absorption and impact resistance
    • Good flexibility
    • High build single coat application >50 mils
    • 100% solids, Isocyanate free, environmentally friendly & safe
    • Easily applied by spray, brush, roller or cartridge

    Description:

    SP-2888® RG is an epoxy/polyurethane Hybrid coating based on “State of the Art” epoxy/urethane chemistry. The synergistic effect of co-polymerizing epoxy and polyurethane produces a coating with the superior adhesion and corrosion resistance of an epoxy along with the added toughness of a polyurethane. This environmentally friendly, 100% solids, & isocyanate free, two component coating system is available in Brush Grade, Spray Grade, Repair Cartridges and Spray Cartridges. SP-2888® RG is the coating most preferred for protection of steel and other metal surfaces from severe corrosion and abrasion.


  • SP-2888 RG Spray

    Features:

    • Excellent resistance to cathodic disbonding up to 85˚C (185˚F)
    • Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE), Fiber Reinforced Plastic (FRP) and Polyolefin (PP/PE)
    • Excellent abrasion, chemical, water absorption and impact resistance
    • Good flexibility
    • High build single coat application >50 mils
    • 100% solids, Isocyanate free, environmentally friendly & safe
    • Easily applied by spray, brush, roller or cartridge

    Description:

    SP-2888® RG is an epoxy/polyurethane Hybrid coating based on “State of the Art” epoxy/urethane chemistry. The synergistic effect of co-polymerizing epoxy and polyurethane produces a coating with the superior adhesion and corrosion resistance of an epoxy along with the added toughness of a polyurethane. This environmentally friendly, 100% solids, & isocyanate free, two component coating system is available in Brush Grade, Spray Grade, Repair Cartridges and Spray Cartridges. SP-2888® RG is the coating most preferred for protection of steel and other metal surfaces from severe corrosion and abrasion.


  • SP-2889 EPL

    Features:

    • Excellent resistance to high temperature cathodic disbonding up to 80˚C (176˚F)
    • Excellent adhesion to grit steel surfaces, Fusion Bond Epoxy (FEB), Fiber Reinforced Plastic (FRP), Polyolefin (PP/PE)
    • 100% Solids, Isocyanate free, environmentally friendly & safe
    • Good flexibility
    • Excellent chemical, abrasion and impact resistance
    • Easily applied by spray, brush or roller

    Description:

    A variation of SP-2888® RG. Epoxy / Polyurethane coating in which the pot life has been extended. This enables the Spray Grade to be applied with airless spray equipment. The performance properties are similar to SP-2888® RG. in which the urethane polymer is pre-bonded to the epoxy resin, rendering the coating “isocyanate free”. The synergistic effect of co-polymerizing epoxy and polyurethane produces a coating with the superior adhesion and corrosion resistance of epoxy along with the added toughness and abrasion resistance of polyurethane. This environmentally friendly, 100% solids, & Isocyanate free two component coating system is available in Spray Grade and Brush Grade.


  • SP-3888 Brush

    Features:

    • Excellent resistance to cathodic disbonding up to 95˚C (203˚F)
    • Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE), Fiber Reinforced Pastic (FRP), Polyolefin (PP/PE)
    • Excellent abrasion, chemical, water absorption and impact resistance
    • Good flexibility
    • High build single coat appliction > 50 mils
    • 100% solids, Isocyanate free, environmentally friendly & safe

    Description:

    A range of surface coatings based on “State of the Art” epoxy chemistry. It has excellent high temperature operating capability up to 95˚C (203˚F). Available in Brush Grade, Spray Grade and Repair Cartridges.


  • SP-3888 Cartridge

    Features:

    • Excellent resistance to cathodic disbonding up to 95˚C (203˚F)
    • Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE), Fiber Reinforced Pastic (FRP), Polyolefin (PP/PE)
    • Excellent abrasion, chemical, water absorption and impact resistance
    • Good flexibility
    • High build single coat appliction > 50 mils
    • 100% solids, Isocyanate free, environmentally friendly & safe

    Description:

    A range of surface coatings based on “State of the Art” epoxy chemistry. It has excellent high temperature operating capability up to 95˚C (203˚F). Available in Brush Grade, Spray Grade and Repair Cartridges.


  • SP-3888 Fast Cure

    Features:

    • Excellent resistance to cathodic disbonding up to 95˚C (203˚F)
    • Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE), other epoxies and urethanes
    • Fast Cure, quick handling and quick return to service
    • Excellent chemical and water absorption resistance
    • Excellent wetting properties
    • High abrasion and impact resistance
    • Easily applied by cartridge dispensers
    • 100% solids, Isocyanate free, environmentally friendly & safe

    Description:

    A specially formulated version of SP-3888® based on modified Novolac epoxy chemistry. This product is designed for the repairs of damaged Fusion Bond Epoxy (FBE) and other liquid applied pipeline coatings where quick drying and quick handling are required. It has an excellent high operating temperature capability and cathodic disbondment resistance up to 95˚C (203˚F). Available in 50ml and 450ml Repair Cartridge.


  • SP-3888 Spray

    Features:

    • Excellent resistance to cathodic disbonding up to 95˚C (203˚F)
    • Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE), Fiber Reinforced Pastic (FRP), Polyolefin (PP/PE)
    • Excellent abrasion, chemical, water absorption and impact resistance
    • Good flexibility
    • High build single coat appliction > 50 mils
    • 100% solids, Isocyanate free, environmentally friendly & safe

    Description:

    A range of surface coatings based on “State of the Art” epoxy chemistry. It has excellent high temperature operating capability up to 95˚C (203˚F). Available in Brush Grade, Spray Grade and Repair Cartridges.


  • SP-4888 Brush

    Features:

    • Excellent resistance to high temperature cathodic disbonding up to 80˚C (176˚F)
    • Excellent adhesion to grit blasted steel wet and dry surfaces, Fusion Bond Epoxy (FBE)
    • Isocyanate free
    • 100% solids, environmentally friendly & safe

    Description:

    A 100% solids, high performance epoxy coating developed specifically for application on wet or damp steel surfaces. In addition, this product may be applied on dry steel surfaces with equal corrosion protection properties. When applied as directed, it is an excellent corrosion protection coating with superior adhesion and resistance to cathodic disbonding at temperatures up to 80˚C (176˚F).


  • SP-7888

    Features:

    • Excellent adhesion to steel surfaces, Fusion Bond Epoxy (FBE)
    • 100% solids
    • Excellent fresh and salt water resistance
    • Good flexibility
    • Good acid and abrasion resistance
    • High build one-coat application
    • Certified by UL to meet NSF/ANSI/CAN 61 and NSF/ANSI/CAN 600

    Description:

    A 100% solids, two-component high performance epoxy coating specifically formulated for use as a single coat interior lining and exterior coating system for potable water storage facilities, pipe and treatment plants. The 100% solids, high build, single coat applied coating cures to form a tough, durable, non-toxic, monolithic membrane with superior corrosion and water resistance.


  • SP-8888 Brush

    Features:

    • Excellent resistance to high temperature cathodic disbonding up to 150˚C (302˚F)
    • Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE), Fiber Reinforced Plastic (FRP), Polyolefin (PP/PE) and HPCC
    • Service Temperature up to 150˚C (302˚F)
    • Excellent impact resistance; good flexibility
    • High build single coat application > 50 mils
    • 100% solids, Isocyanate free, environmentally friendly & safe
    • Easily applied by spray, brush, roller or cartridge

    Description:

    A “State of the Art” two-component coating which has been specifically formulated for high temperature pipelines. This product cures to a highly cross-linked coating with an excellent resistance to high temperature cathodic disbonding up to 150˚C (302˚F). This environmentally friendly, 100% solids, & Isocyanate free two component coating system is available in Brush Grade, Spray Grade and Repair Cartridges.


  • SP-8888 Cartridge

    Features:

    • Excellent resistance to high temperature cathodic disbonding up to 150˚C (302˚F)
    • Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE), Fiber Reinforced Plastic (FRP), Polyolefin (PP/PE) and HPCC
    • Service Temperature up to 150˚C (302˚F)
    • Excellent impact resistance; good flexibility
    • High build single coat application > 50 mils
    • 100% solids, Isocyanate free, environmentally friendly & safe
    • Easily applied by spray, brush, roller or cartridge

    Description:

    A “State of the Art” two-component coating which has been specifically formulated for high temperature pipelines. This product cures to a highly cross-linked coating with an excellent resistance to high temperature cathodic disbonding up to 150˚C (302˚F). This environmentally friendly, 100% solids, & Isocyanate free two component coating system is available in Brush Grade, Spray Grade and Repair Cartridges.


  • SP-8888 Spray

    Features:

    • Excellent resistance to high temperature cathodic disbonding up to 150˚C (302˚F)
    • Excellent adhesion to grit blasted steel surfaces, Fusion Bond Epoxy (FBE), Fiber Reinforced Plastic (FRP), Polyolefin (PP/PE) and HPCC
    • Service Temperature up to 150˚C (302˚F)
    • Excellent impact resistance; good flexibility
    • High build single coat application > 50 mils
    • 100% solids, Isocyanate free, environmentally friendly & safe
    • Easily applied by spray, brush, roller or cartridge

    Description:

    A “State of the Art” two-component coating which has been specifically formulated for high temperature pipelines. This product cures to a highly cross-linked coating with an excellent resistance to high temperature cathodic disbonding up to 150˚C (302˚F). This environmentally friendly, 100% solids, & Isocyanate free two component coating system is available in Brush Grade, Spray Grade and Repair Cartridges.


  • SP-9888 Brush

    Features:

    • 100% solids
    • Excellent resistance to high temperature cathodic disbonding and autoclave conditions up to 150˚C (302˚F)
    • Excellent abrasion and impact resistance
    • High build in a single coat
    • Excellent Chemical Resistance
    • Good flexibility

    Description:

    A “State of the Art” two component coating system based on novolac chemistry. The environmentally friendly, 100% solids, two component coating system can be easily applied through spray, brush, or roller and cures to a highly cross-linked coating with excellent chemical, solvent and water immersion resistance.


  • SP-9888 Grout

    Features:

    • Superior wetting properties
    • Excellent adhesion to grit blasted steel
    • Excellent service temperature up to 95˚C (203˚F)
    • Excellent Cathodic Disbondment up to 95˚C (203˚F)
    • Excellent Impact Resistance
    • 100% solids, Isocyanate free, Environmentally friendly and safe
    • Easily applied by Brush/Roller/Spatula/Gloved Hand
    • High build single coat application up to 500 mils (13mm, ½”)

    Description:

    A multifunctional two-component ultra-high thixotropic coating that has been formulated based on State of the Art chemistry. This product has been uniquely designed for grouting and sealing purposes for tank floor and tank wall applications to be applied in conjunction with the SP-9888® coating series. Additionally, it can be used for grouting and sealing purposes for various pipeline applications.


  • SP-9888 HARC

    Features:

    • Super abrasion resistance
    • Excellent resistance to high temperature cathodic disbonding up to 150˚C (302˚F)
    • Good flexibility and impact resistance
    • Service temperature up to 150˚C (302˚F)
    • High build in a single coat
    • Excellent chemical resistance

    Description:

    The ultra-high abrasion resistance version of SP-9888®. The “State of the Art” novolac chemistry coupled with advanced ceramic materials provides superior abrasion resistance and excellent chemical, solvent and water immersion resistance.


  • SP-9888 Pipe Lining

    Features:

    • 100% solids
    • Excellent resistance to high temperature cathodic disbonding and autoclave conditions up to 150˚C (302˚F)
    • Excellent abrasion and impact resistance
    • High build in a single coat
    • Excellent Chemical Resistance
    • Good flexibility

    Description:

    A “State of the Art” two component coating system based on novolac chemistry. The environmentally friendly, 100% solids, two component coating system can be easily applied through spray, brush, roller and cures to a highly cross-linked coating with excellent chemical, solvent and water immersion resistance.


  • SP-9888 Spray

    Features:

    • 100% solids
    • Excellent resistance to high temperature cathodic disbonding and autoclave conditions up to 150˚C (302˚F)
    • Excellent abrasion and impact resistance
    • High build in a single coat
    • Excellent Chemical Resistance
    • Good flexibility

    Description:

    A “State of the Art” two component coating system based on novolac chemistry. The environmentally friendly, 100% solids, two component coating system can be easily applied through spray, brush, or roller and cures to a highly cross-linked coating with excellent chemical, solvent and water immersion resistance.


  • SP-9888 Stripe Coating

    Features:

    • Excellent chemical, acid, solvent and water resistance when topcoated with SP-9888® Tank Lining
    • Good recoatibility
    • Good flexibility
    • Excellent adhesion to steel
    • Easily applied by brush or spray
    • 100% solids, Isocyanate free, environmentally friendly & safe

    Description:

    A 100% solids, thin film, "State of the Art" two-component epoxy coating for use on tanks, pipes, steel structures, offshore platforms and subsea structures. This environmentally friendly, 100% solids, epoxy, two component coating system is available in Brush Grade, Spray Grade. No further solvent reduction is necessary.


No Products Found.